Products
Stainless steel fasteners
Metric and inch. DIN, ISO, ASME, JIS, IFI and ASTM. Bolts cold-formed up to M36 and 1-1/2 inch.
Products
Metric and inch. DIN, ISO, ASME, JIS, IFI and ASTM. Bolts cold-formed up to M36 and 1-1/2 inch.

The standard grade for most of the range
Higher corrosion resistance for marine and chemical environments
Strength comparable to carbon-steel class 8.8 (tensile above 800 N/mm², yield above 600 N/mm²), with better corrosion resistance and anti-galling than 304
Available for DIN 933 bolts and DIN 934 nuts

Standards DIN 933, DIN 931, ISO 4017, ISO 4014, ASME B18.2.1, JIS B1180
Size range M3 to M36, 1/4" to 1"
Materials 304 · 316 · D2-80 duplex series

Standards DIN 912, ASME B18.3, JIS B1176, ISO 7380, DIN 7991, DIN 7984, DIN 6921
Size range M3 to M30, 1/4" to 3/4"
Materials 304 · 316 · D2-80 duplex series

Standards DIN 6921, DIN 603, ASME B18.5
Size range M5 to M12, 1/4" to 1/2"
Materials 304 · 316

Standards DIN 571, ASME B18.2.1
Size range 6 to 12 mm, 1/4" to 1/2"
Materials 304

Standards DIN 7981, DIN 7982, DIN 7985, DIN 965, ISO 7049, ISO 7050, ISO 7045, ISO 7046, ASME B18.6.3
Size range ST2.9 to ST6.3; M3 to M8; #4 to #14
Materials 304

Standards DIN 934, DIN 439, ISO 4032, ASME B18.2.2, ASTM A194 Gr.8 / 8M, JIS B1181
Size range M2.5 to M36, #8 to 1-1/4"
Materials 304 · 316 · D2-80 duplex series

Standards DIN 985, DIN 982, DIN 6923, IFI 145, DIN 928, DIN 929, DIN 1587, UNI 5587
Size range Nylon insert, flange, weld, dome cap, heavy hex
Materials 304 · 316

Standards Hex, socket, pan and flat head with flat, spring or tooth washers
Size range M3 to M12
Materials 304

Standards DIN 975, DIN 976, IFI 136, ASTM A193 B8 / B8M
Size range M5 to M33, 1 to 3 m; #10 to 1-1/4", 3 to 12 ft; U-bolts M6 to M24
Materials 304 · 316

Standards DIN 125, DIN 9021, DIN 127, DIN 6797, DIN 6798, ASME B18.22.1, ANSI B18.21.1
Size range Flat M1.6 to M33, spring M3 to M30, tooth M3 to M20
Materials 304 · 316

Standards DIN 913, DIN 916
Size range M3 to M10
Materials 304
The families below are stocked as standard. Full size tables are in the product range PDF.
Studs with full, single-end or double-end threads, chemical anchor bolts, dowel screws, kits, and parts made to your drawing. Larger sizes are cold-formed on our large-bolt lines up to M36 and 1-1/2 inch.
The product range shows standard stock ranges. Longer lengths, fine threads, left-hand threads, custom head marks and parts to drawing are quoted on request.